Future implications of urban intensification on residential water demand

Over recent decades Auckland, New Zealand, metropolitan area has vastly expanded as a result of rapid population growth and low-density housing developments. In order to manage the uncontrolled low-density urban sprawl, Auckland Council proposed a compact city model through promoting higher density housing developments. In order to understand the implications of this transition on future residential water demand, this study first evaluated water consumption in three major housing types in Auckland including single houses, low-rise and high-rise apartments. Using the geographic information system, the water consumption information, estimated from a large sample of 60,000 dwellings across Auckland, was subsequently integrated with the Proposed Auckland Unitary Plan outlining the future housing composition over different areas in Auckland. Through developing different growth scenarios, the study showed that the housing transition from single houses to more intensified multi-unit houses cannot considerably affect the average per capita water consumption in Auckland.     

基于高频AQI数据的关中城市群空气污染规律探索

基于高频分时AQI及各污染物浓度数据,本文使用"AQI小时指数"、首要污染物等进行统计分析并建立VAR模型对关中城市群空气污染的总体情况、日内波动规律以及城市间空气污染的关联规律做了不同层次的挖掘。研究结果表明:(1)关中城市群的空气质量整体较差,春、冬季空气污染程度明显大于夏季,空气污染的"季节效应"和"集簇性"明显,且主要表现为颗粒物污染。(2)空气质量的日内波动规律在春、冬两季表现为下半天优于上半天,夏季夜间优于白天。但在不考虑四季AQI小时指数图"相位"差异的情况下,四季空气污染的日内波动呈现出明显的相似性。(3)各城市空气污染存在明显的关联规律。城市群内一个城市空气污染的恶化会加剧其他城市的空气污染,并且对其他城市空气污染的影响峰值会在24小时之内出现,且该影响会随着空间和时间尺度的增大而逐步衰减。     

E-bikers’ braking behavior: Results from a naturalistic cycling study

Abstract

Objective: The number of e-bike users has increased significantly over the past few years and with it the associated safety concerns. Because e-bikes are faster than conventional bicycles and more prone to be in conflict with road users, e-bikers may need to perform avoidance maneuvers more frequently. Braking is the most common avoidance maneuver but is also a complex and critical task in emergency situations, because cyclists must reduce speed quickly without losing balance. The aim of this study is to understand the braking strategies of e-bikers in real-world traffic environments and to assess their road safety implications. This article investigates (1) how cyclists on e-bikes use front and rear brakes during routine cycling and (2) whether this behavior changes during unexpected conflicts with other road users.

Methods: Naturalistic data were collected from 6 regular bicycle riders who each rode e-bikes during a period of 2 weeks, for a total of 32.5?h of data. Braking events were identified and characterized through a combined analysis of brake pressure at each wheel, velocity, and longitudinal acceleration. Furthermore, the braking patterns obtained during unexpected events were compared with braking patterns during routine cycling.

Results: In the majority of braking events during routine cycling, cyclists used only one brake at a time, favoring one of the 2 brakes according to a personal pre-established pattern. However, the favored brake varied among cyclists: 66% favored the rear brake and 16% the front brake. Only 16% of the cyclists showed no clear preference, variously using rear brake, front brake, or combined braking (both brakes at the same time), suggesting that the selection of which brake to use depended on the characteristics of the specific scenario experienced by the cyclist rather than on a personal preference. In unexpected conflicts, generally requiring a larger deceleration, combined braking became more prevalent for most of the cyclists; still, when combined braking was not applied, cyclists continued to use the favored brake of routine cycling. Kinematic analysis revealed that, when larger decelerations were required, cyclists more frequently used combined braking instead of single braking.

Conclusions: The results provide new insights into the behavior of cyclists on e-bikes and may provide support in the development of safety measures including guidelines and best practices for optimal brake use. The results may also inform the design of braking systems intended to reduce the complexity of the braking operation.     

Carbon dioxide emissions from cities in China based on high resolution emission gridded data

Based on the China high resolution emission gridded data (1 km spatial resolution), this article is aimed to create a Chinese city carbon dioxide (CO₂) emission data set using consolidated data sources as well as normalized and standardized data processing methods. Standard methods were used to calculate city CO₂ emissions, including scope 1 and scope 2. Cities with higher CO₂ emissions are mostly in north, northeast, and eastern coastal areas. Cities with lower CO₂ emissions are in the western region. Cites with higher CO₂ emissions are clustered in the Jing-Jin-Ji Region (such as Beijing, Tianjin, and Tangshan), and the Yangtze River Delta region (such as Shanghai and Suzhou). The city per capita CO₂ emission is larger in the north than the south. There are obvious aggregations of cities with high per capita CO₂ emission in the north. Four cities among the top 10 per capita emissions (Erdos, Wuhai, Shizuishan, and Yinchuan) cluster in the main coal production areas of northern China. This indicates the significant impact of coal resources endowment on city industry and CO₂ emissions. The majority (77%) of cities have annual CO₂ emissions below 50 million tons. The mean annual emission, among all cities, is 37 million tons. Emissions from service-based cities, which include the smallest number of cities, are the highest. Industrial cities are the largest category and the emission distribution from these cities is close to the normal distribution. Emissions and degree of dispersion, in the other cities (excluding industrial cities and service-based cities), are in the lowest level. Per capita CO₂ emissions in these cities are generally below 20 t/person (89%) with a mean value of 11 t/person. The distribution interval of per capita CO₂ emission within industrial cities is the largest among the three city categories. This indicates greater differences among per capita CO₂ emissions of industrial cities. The distribution interval of per capita CO₂ emission of other cities is the lowest, indicating smaller differences of per capita CO₂ emissions among this city category. Three policy suggestions are proposed: first, city CO₂ emission inventory data in China should be increased, especially for prefecture level cities. Second, city responsibility for emission reduction, and partitioning the national goal should be established, using a bottom-up approach based on specific CO₂ emission levels and potential for emission reductions in each city. Third, comparative and benchmarking research on city CO₂ emissions should be conducted, and a Top Runner system of city CO₂ emission reduction should be established.     

Supporting Diverse Data Providers in the Open Water Data Initiative: Communicating Water Data Quality and Fitness of Use

Shared, trusted, timely data are essential elements for the cooperation needed to optimize economic, ecologic, and public safety concerns related to water. The Open Water Data Initiative (OWDI) will provide a fully scalable platform that can support a wide variety of data from many diverse providers. Many of these will be larger, well‐established, and trusted agencies with a history of providing well‐documented, standardized, and archive‐ready products. However, some potential partners may be smaller, distributed, and relatively unknown or untested as data providers. The data these partners will provide are valuable and can be used to fill in many data gaps, but can also be variable in quality or supplied in nonstandardized formats. They may also reflect the smaller partners' variable budgets and missions, be intermittent, or of unknown provenance. A challenge for the OWDI will be to convey the quality and the contextual “fitness” of data from providers other than the most trusted brands. This article reviews past and current methods for documenting data quality. Three case studies are provided that describe processes and pathways for effective data‐sharing and publication initiatives. They also illustrate how partners may work together to find a metadata reporting threshold that encourages participation while maintaining high data integrity. And lastly, potential governance is proposed that may assist smaller partners with short‐ and long‐term participation in the OWDI.     

Optimal Reorganization of NASA Earth Science Data for Enhanced Accessibility and Usability for the Hydrology Community

A long‐standing “Digital Divide” in data representation exists between the preferred way of data access by the hydrology community and the common way of data archival by earth science data centers. Typically, in hydrology, earth surface features are expressed as discrete spatial objects (e.g., watersheds), and time‐varying data are contained in associated time series. Data in earth science archives, although stored as discrete values (of satellite swath pixels or geographical grids), represent continuous spatial fields, one file per time step. This Divide has been an obstacle, specifically, between the Consortium of Universities for the Advancement of Hydrologic Science, Inc. and NASA earth science data systems. In essence, the way data are archived is conceptually orthogonal to the desired method of access. Our recent work has shown an optimal method of bridging the Divide, by enabling operational access to long‐time series (e.g., 36 years of hourly data) of selected NASA datasets. These time series, which we have termed “data rods,” are pre‐generated or generated on‐the‐fly. This optimal solution was arrived at after extensive investigations of various approaches, including one based on “data curtains.” The on‐the‐fly generation of data rods uses “data cubes,” NASA Giovanni, and parallel processing. The optimal reorganization of NASA earth science data has significantly enhanced the access to and use of the data for the hydrology user community.     

大数据解析技术在大气环境监测中的应用研究

针对近年来新兴的大数据及挖掘、分析技术,对大数据解析技术在环境科学研究中的应用进行了分析和探析。以城市局部地区大气细颗粒污染物PM2.5浓度计算为例,筛选了PM2.5浓度历史数据、气象条件、交通状况、人群活动情况、网格道路状况等数据为影响特征量,分析了用神经网络法进行大数据解析和推演的原理和数学过程,是用数学、计算机、统计等方法研究解决多元、非线性复杂环境问题的一种新的探索。     

Use of Predictive Weather Uncertainties in an Irrigation Scheduling Tool Part II: An Application of Metrics and Adjoints

We apply predictive weather metrics and land model sensitivities to improve the Colorado State University Water Irrigation Scheduler for Efficient Application (WISE). WISE is an irrigation decision aid that integrates environmental and user information for optimizing water use. Rainfall forecasts and verification performance metrics are used to estimate predictive rainfall probabilities that are used as input data within the irrigation decision aid. These input data errors are also used within a land model sensitivity study to diagnose important prognostic water movement behaviors for irrigation tool development purposes simultaneously performing the analysis in space and time. Thus, important questions such as “how long can a crop water application be delayed while maintaining crop yield production?” are addressed by evaluating crop growth stage interactions as a function of soil depth (i.e., space), rainfall events (i.e., time), and their probabilistic uncertainties. Editor’s note : This paper is part of the featured series on Optimizing Ogallala Aquifer Water Use to Sustain Food Systems. See the February 2019 issue for the introduction and background to the series.     

基于大数据技术构建生态环境信息化体系及其重点应用研究

本文首先分析了生态环境信息化体系的主要构成要素,其后基于大数据技术的生态环境信息化体系重点领域应用进行了深入研究。     

浅谈GIS在城市环境总体规划中的应用与探索

环保大数据结合地理信息系统是实现城市环境总体规划空间化、促使环境管理转型的重要举措。城市环境总体规划是我国环境规划制度中的一项尝试,实现环境管理由末端治理转向前端控制的基础性、空间性、综合性、战略性规划。本文在分析GIS在环境规划领域的技术优势基础上,提出城市环境总体规划中生态保护红线划定、环境(生态)功能区划、要素空间管控、环境风险防控、产业布局调控五大技术需求。总结GIS在城市环境总体规划中的五大技术应用:空间基础数据处理与评价模型应用、标准化制图与空间信息表达、信息系统管理平台建设、专业软件数据转换、衔接"多规合一"平台等。最后,提出GIS支持下的环境功能区划和生态保护红线评估等功能模块开发、城环总规信息系统上的环境影响评价模块开发以及环境详细规划控制图则编制方法等探索方向。